Fittings & accessories
Emergency stops, remote controls & cable reels
Control equipment and cable management for industrial waterjet systems.
Fittings & accessories
Connectors & Cables
Connectors & Cables
Electrical connectors, cables, and accessories for cleaning-equipment controls.
- Connector options
- 4 or 7 pin
- Termination
- Soldered or crimped
Equipment selection and ongoing support from Waterblast Industrial.
The product
Built for the work.
Electrical connectors, chassis sockets, cable entries and cable for equipment controls. Choose pin count, housing and termination to match the system.
Where it works.
- Equipment control wiring
What it offers.
- 4-pin and 7-pin options
- Soldered and crimped terminations
- Steel and plastic housings; seals and protection caps
Technical details
Specifications & models.
Compare the configuration, then talk to us about the complete setup.
Open a section to see its details. Wide tables scroll sideways. Ratings apply to the stated model or component; separate maximum values are not a guaranteed operating point. M / F indicate male / female; LH / RH indicate left- / right-hand thread. Blank source values are shown as —.
Standard Connectors, 7 Pin, Solder Connection4 entries
| DESCRIPTION | PART NO. |
|---|---|
| Connector 7 pin M steel | EL.01103 |
| Connector 7 pin F steel | EL.01108 |
| Chassis part 7 pin M steel | EL.01101 |
| Chassis part 7 pin F steel | EL.01102 |
Standard Connectors, 7 Pin, Crimp Connection6 entries
| DESCRIPTION | PART NO. |
|---|---|
| Connector 7 pin M steel | EL.01103.001 |
| Connector 7 pin F steel | EL.01108.001 |
| Chassis part 7 pin M steel | EL.01101.001 |
| Chassis part 7 pin F steel | EL.01102.001 |
| Spare/replacement pin M | 030-8586-000 |
| Spare/replacement pin F | 031-8555-110 |
Extra Accessories for Standard Connectors7 entries
| DESCRIPTION | PART NO. |
|---|---|
| Protection plug 7 pin | EL.01106 |
| Protection plug 7 pin | EL.01107 |
| Seal for Chassis part | EL.075-8515-0 |
| Cable nut with pull release PG13 (incl. EL.116 336) | EL.100.2015 |
| Cable nut with pull release PG11 | EL.100.2007 |
| Seal ring PG13 5-8 mm | EL.116.335 |
| Seal ring PG13 5-13 mm | EL.116.336 |
Skintop Bending Connection3 entries
| DESCRIPTION | PART NO. |
|---|---|
| Skintop bending connection PG11 | EL.530.15620 |
| Skintop bending connection PG13 | EL.530.15630 |
| Skintop bending connection M20x1.5 | EL.530.17630 |
Other Connectors14 entries
| DESCRIPTION | PART NO. |
|---|---|
| Connector 4 pin M steel | EL.401326 |
| Connector 4 pin F steel | EL.401327 |
| Connector 7 pin M plastic | EL.3104.001 |
| Connector 7 pin F plastic | EL.3105.001 |
| Chassis Part 7 pin M plastic | EL.3106.001 |
| Chassis Part 7 pin F plastic | EL.3107.001 |
| Connector 4 pin M plastic | EL.3108.001 |
| Connector 4 pin F plastic | EL.3109.001 |
| Chassis Part 4 pin M plastic | EL.3110.001 |
| Chassis Part 4 pin F plastic | EL.3111.000 |
| Connector 4 pin M steel crimp | EL.401326.001 |
| Protection cap for EL.401326.001 | EL.401326.002 |
| Connector 4 Pin F steel crimp | EL.401327.001 |
| Protection cap for EL.401327.001 | EL.401327.002 |
Electrical Cable 7 Wire2 entries
| DESCRIPTION | PART NO. |
|---|---|
| Electric cable 4 wire PUR 4 x 0.75 | EL.082.1020 |
| Electric cable 7 wire PUR 7 x 0.75 | EL.70000 |
Technical resources
Documents & videos.
Need a manual, dimensional drawing or current technical sheet? Tell us the product and configuration you are considering.
Request a manual or drawing ↗Talk to Waterblast Industrial
Specify it for your job.
Get help with equipment selection, configuration and a quote.
What to include.
Send pin count and wiring details, housing type, mating connector and required cable length.
Keep exploring
Explore similar equipment.
Fittings & accessories
Rupture Disc
A replaceable pressure-relief component for compatible high-pressure equipment.
Fittings & accessories
Rupture Disc Holder
A holder for a matched rupture disc in a high-pressure system.
Equipment. Expertise. Support.