Nozzles
Insert Nozzles
Replaceable nozzle inserts for industrial waterjet cleaning and cutting heads.
Nozzles
Nozzle Drivers
DERC Nozzle Drivers
Add jet thrust behind a nozzle or between hose sections in a cleaning assembly.
- Maximum pressure
- 1,500 bar
- Purpose
- Additional jet thrust
Equipment selection and ongoing support from Waterblast Industrial.
The product
Built for the work.
Pusher units that add jet thrust behind a cleaning nozzle or between hose sections. Body size, connection pair and jet drilling vary by configuration.
Where it works.
- Additional thrust in hose-fed waterjet cleaning
What it offers.
- Hardened corrosion-resistant body
- Multiple thread and jet-count combinations
Technical details
Specifications & models.
Compare the configuration, then talk to us about the complete setup.
Confirm the complete drilling specification with the part number; two published rows share a code but list different jet counts.
Open a section to see its details. Wide tables scroll sideways. Ratings apply to the stated model or component; separate maximum values are not a guaranteed operating point. M / F indicate male / female; LH / RH indicate left- / right-hand thread. Blank source values are shown as —.
DERC Nozzle Driver Configurations18 entries
| CONNECTION D1 | CONNECTION D2 | DIAMETER | NO. OF JETS / Ø JETS | PART NO. |
|---|---|---|---|---|
| M7x1 M | M7x1 F | Ø 9.53 mm | 2 x Ø 0.8 mm | ND.10.07.02 |
| M7x1 M | M7x1 F | Ø 9.53 mm | 3 x Ø 0.8 mm | ND.10.07.03 |
| M7x1 M | M7x1 F | Ø 9.53 mm | 4 x Ø 0.8 mm | ND.10.07.04 |
| 1/8" BSP M | 1/8" BSP F | Ø 12 mm | 2 x Ø 0.8 mm | ND.12.18.02 |
| 1/8" BSP M | 1/8" BSP F | Ø 12 mm | 3 x Ø 0.8 mm | ND.12.18.03 |
| 1/8" BSP M | 1/8" BSP F | Ø 12 mm | 4 x Ø 0.8 mm | ND.12.18.04 |
| 1/4" BSP M | 1/4" BSP F | Ø 16 mm | 2 x Ø 0.8 mm | ND.16.14.02 |
| 1/4" BSP M | 1/4" BSP F | Ø 16 mm | 3 x Ø 0.8 mm | ND.16.14.03 |
| 1/4" BSP M | 1/4" BSP F | Ø 16 mm | 4 x Ø 0.8 mm | ND.16.14.04 |
| 1/4" BSP M | 1/4" BSP F | Ø 22 mm | 2 x Ø 0.9 mm | ND.22.14.02 |
| 1/4" BSP M | 1/4" BSP F | Ø 22 mm | 3 x Ø 0.8 mm | ND.22.14.03 |
| M24x1.5 M | M24X1.5 F | Ø 30 mm | 2 x Ø 1.0 mm | ND.30.24.02 |
| M24x1.5 M | M24X1.5 F | Ø 30 mm | 3 x Ø 1.2 mm | ND.30.24.03 |
| M24x1.5 M | M24X1.5 F | Ø 30 mm | 4 x Ø 1.0 mm | ND.30.24.04 |
| M22x1.5 M | 1/4" BSP F | Ø 31 mm | 2 x Ø 0.8 mm | ND.31.03.14 |
| M22x1.5 M | M24x1.5 M | Ø 31 mm | 3 x Ø 1.0 mm | ND.31.03.24 |
| M22x1.5 M | 1/4" BSP F | Ø 31 mm | 4 x Ø 0.8 mm | ND.31.03.14 |
| M36x2 M | M36x2 M | Ø 50 mm | 4 x M6 | ND.50.36M.36M |
Technical resources
Documents & videos.
Need a manual, dimensional drawing or current technical sheet? Tell us the product and configuration you are considering.
Request a manual or drawing ↗Talk to Waterblast Industrial
Specify it for your job.
Get help with equipment selection, configuration and a quote.
What to include.
Send both connection details, hose route, pressure/flow and required thrust.
Keep exploring
Explore similar equipment.
Equipment. Expertise. Support.