Automated systems
Scaffold Cleaner
Automate the cleaning of scaffolding planks with a dedicated washing system.
Automated systems
Multi Tool Valve UHP
DERC Multi Tool Valve UHP
Connect two compatible high-pressure guns or foot valves to one pump.
- Maximum pressure
- 2,800 bar
- Maximum flow
- 52 l/min; 26 l/min per consumer
- Supply
- 24 V DC and 7 bar air
Equipment selection and ongoing support from Waterblast Industrial.
The product
Built for the work.
A valve package for operating two electrically controlled guns or foot valves from one high-pressure unit. External air and 24 V DC are required.
Where it works.
- Two-consumer waterjetting from one pump
What it offers.
- Stainless steel carrying frame
- Separate consumer control connections
- Configured around the pump and tool control system
Technical details
Specifications & models.
Compare the configuration, then talk to us about the complete setup.
Control interface and pressure/flow matching must be confirmed for both consumers.
Open a section to see its details. Wide tables scroll sideways. Ratings apply to the stated model or component; separate maximum values are not a guaranteed operating point. M / F indicate male / female; LH / RH indicate left- / right-hand thread. Blank source values are shown as —.
SPECIFICATIONS10 entries
- PART NO.
- D.MTV.2800EXI-7PS
- MAX. PRESSURE
- 2800 bar
- MAX. FLOW
- 52 lpm (26 l per consumer)
- CONNECTION INLET
- Inlet 9/16” HP (M30x2 or 1 1/8” UNF in combination with M14 of 9/16” LH) or M34x2 in combination with M18x1.5 LH
- CONNECTION OUTLET
- 2 x 9/16”, 2 x 3/8” HP out for 5 mm UHP hose
- INPUT VOLTAGE
- 24VDC
- INPUT AIR
- 7 bar
- SIGNAL OUT
- 2 x 7 Pin Connector Steel 2 channel intrinsic safe EXI - for consumers*
- SIGNAL IN
- 1 x 7 Pin Connector Steel 2 channel intrinsic safe EXI - unit pressure on/off*
- Note
- * Other connectors available on request
Technical resources
Documents & videos.
Need a manual, dimensional drawing or current technical sheet? Tell us the product and configuration you are considering.
Request a manual or drawing ↗Talk to Waterblast Industrial
Specify it for your job.
Get help with equipment selection, configuration and a quote.
What to include.
Send pump pressure/flow, both consumer models, electrical control details and available air supply.
Keep exploring
Explore similar equipment.
Automated systems
Air Preheater Cleaner
A controlled waterjet system for cleaning air preheater elements.
Automated systems
Air Preheater Cleaner XXL
A larger waterjet cleaning system for high-capacity rotating air preheaters.
Equipment. Expertise. Support.