Pipe cleaning

Speed Regulated Line Cleaner SLC

DERC Speed Regulated Line Cleaner SLC

Controlled rotation for waterjet cleaning inside lines and pipes.

Maximum pressure: 1,500 bar
Rotation: Manually adjustable
Configuration: Choice of heads and centralizers

Enquire about this equipment

Equipment selection and ongoing support from Waterblast Industrial.

Pipe cleaning ↗

The product

Built for the work.

A modular rotating pipe-cleaning tool with manually adjustable speed. Heads, pulling rings and extension arms let the jet arrangement be selected around deposits and the pipe wall.

Where it works.

Plugged pipes with hard residues
Polishing internal pipe walls

What it offers.

Separate 1,000 and 1,500 bar body configurations
Multiple head port patterns
Extension arms and centralizers for larger pipework

Technical details

Specifications & models.

Compare the configuration, then talk to us about the complete setup.

Open a section to see its details. Wide tables scroll sideways. Ratings apply to the stated model or component; separate maximum values are not a guaranteed operating point. M / F indicate male / female; LH / RH indicate left- / right-hand thread. Blank source values are shown as —.

DERC SLC OPTIONS7 entries

DERC SLC OPTIONS
Specification	SLC-1000	SLC-1500
INLET CONNECTION	3/4"NPT F	M24 x 1.5 Flat F 3/4” - 14 NPS F (3/4 MP)
SHAFT CONNECTION	3/4”NPT M	M24 x 1.5 Flat M
MAX. PRESSURE	1000 bar	1500 bar
DIAMETER	75 mm	75 mm
LENGTH	155 mm	175 mm
MAX. FLOW	380 lpm	380 lpm
PART NO.	SLC-1000-34NF.34NM	SLC-1500-24FV.24MR SLC-1500-12F.24MR

SLC HEAD OPTIONS6 entries

SLC HEAD OPTIONS
Specification	SLC-56-12NF	SLC-56-14NF	SLC-57-14NF	SLC-66-14NF	SLC-66-34UF	SLC-67-14NF
OFF SET	3, 5, 9, 15	3, 5, 9, 15	3, 5, 9, 15	3, 5, 9, 12, 15	5, 9, 12, 15	3, 5, 9, 15
MAX. PRESSURE	1000 bar	1000 bar	1000 bar	1500 bar	1500 bar	1500 bar
CONNECTION	6x 1/2” NPT	6x 1/4” NPT	7x 1/4” NPT	6x 1/4” NPT	6x 3/4” UNF	7x 1/4” NPT
JET ANGLE	2x 45° 2x 90° 2x 135°	2x 45° 2x 90° 2x 135°	1x 15° 2x 45° 2x 90° 2x 135°	2x 45° 2x 90° 2x 135°	2x 45° 2x 90° 2x 135°	Confirm jet arrangement
EXTENSION LANCE	SLC-56-EXT-xxx	-	-	-	SLC-66-EXT-xxx	-
PULLING RING	SLC-90	SLC-90	-	SLC-90	SLC-90	-

SLC-67-14NF is listed with seven ports, but its published angle counts total eight jets.

SLC EXTENSION LANCES9 entries

SLC EXTENSION LANCES
SLC-1000	TOTAL WIDTH 90° — UNIT NOT STATED	TOTAL WIDTH 45° — UNIT NOT STATED
SLC-56-EXT-050	190	146
SLC-56-EXT-075	240	181
SLC-56-EXT-100	290	217
SLC-56-EXT-150	390	287
SLC-56-EXT-200	490	358
SLC-56-EXT-250	590	428
SLC-56-EXT-300	690	499
SLC-56-EXT-350	790	569
SLC-56-EXT-400	890	640

The source does not state width units. Confirm dimensions before using these values for clearance.

Specifications8 entries

Specifications
SLC-1500	TOTAL WIDTH 90° — UNIT NOT STATED	TOTAL WIDTH 45° — UNIT NOT STATED
SLC-66-EXT-050	182	140
SLC-66-EXT-075	232	175
SLC-66-EXT-100	282	210
SLC-66-EXT-150	382	281
SLC-66-EXT-200	482	351
SLC-66-EXT-250	582	422
SLC-66-EXT-300	682	492
SLC-66-EXT-350	782	563