Tube & bundle cleaning

Runner Nozzle Ø 10 mm

DERC Runner Nozzle Ø 10 mm

Reach small heat exchanger tubes with a 10 mm rotating cleaning nozzle.

Body diameter: 10 mm
Body length: 60 mm; 65 mm for 5/16 UNF male
Body pressure options: 1,000 or 1,500 bar; connection dependent

Enquire about Runner Nozzle Ø 10 mm

Equipment selection and ongoing support from Waterblast Industrial.

Tube & bundle cleaning ↗Nozzles ↗

The product

Built for the work.

A 10 mm rotating nozzle for removing plugs and scale from heat exchanger tubes. Choose the inlet body and cleaning head separately to match the tube, pump and deposit.

Where it works.

Heat exchanger tube cleaning
Removal of hard plugs and scale

What it offers.

Recessed drilled jets in replaceable Standard, Unplugger and Polisher heads
Hardened body and inlet cover with wrench flats for handling
Rotating swivel carries the jets around the inside of the tube

Technical details

Specifications & models.

Compare the configuration, then talk to us about the complete setup.

Body ratings and head operating ranges are separate. Select a head within the rating of the complete assembly; a larger head pressure range does not increase the body rating.

Open a section to see its details. Wide tables scroll sideways. Ratings apply to the stated model or component; separate maximum values are not a guaranteed operating point. M / F indicate male / female; LH / RH indicate left- / right-hand thread. Blank source values are shown as —.

Runner 10 - diameter Ø 10 mm - length 60mm5 entries

Runner 10 - diameter Ø 10 mm - length 60mm
CONNECTION	MAX. PRESSURE	PART NO.
M7x1 - female	1500 bar / 22K	RUN10-M7F-3
5/16" UNF - male (65mm)	1500 bar / 22K	RUN10-516M-3
1/16" NPT - female	1000 bar / 15K	RUN10-116NF-3
1/4" UNF LH - female	1500 bar / 22K	RUN10-M4LF-3
1/4" UNF RH - female	1500 bar / 22K	RUN10-M4RF-3

Runner 105 entries

Runner 10
PART NO.	TYPE	MAX. PRESSURE	FLOW
RUN10-025B-S1	Standard	1000-1500 bar / 15-22K	24-30 lpm / 6,5-8 gpm
RUN10-025B-U1	Unplugger	700-1000 bar / 10-15K	19-23 lpm / 5-6 gpm
RUN10-025B-U2	Unplugger	1000-1500 bar / 15-22K	21-25 lpm / 5.5-6.5 gpm
RUN10-025B-P1	Polisher	700-1000 bar / 10-15K	17-21 lpm / 4.5-5.5 gpm
RUN10-025B-P2	Polisher	1000-1500 bar / 15-22K	19-23 lpm / 5-6 gpm

How it fits together

Documents & videos.

Product literature and technical references for a closer look.

DERC Runner Product Sheet DS25 6Product sheet PDF ↗

Request a manual or drawing ↗

Talk to Waterblast Industrial

Specify it for your job.

Get help with equipment selection, configuration and a quote.

What to include.

Send the tube inside diameter, deposit type, pump pressure and flow, hose connection and preferred head part number.

Request a quote Email our team ↗

Equipment. Expertise. Support.

Let’s find the right equipment.

Talk to Waterblast

Runner Nozzle Ø 10 mm